OEM Replacement Clutch Kits

All clutch plates are made of either 6061 T6 or high-tempered steel with our own race proven aramid fibers material. Each plate design was tested so that maximum performance is achieved. Different groove patterns were designed for maximum oil circulation and heat dissipation. The steady flow of lubricant will cool and determine the longevity of your clutch.

All Big Twin kits are packaged with frictions and steels and a pre-measured stack height for easy installation.


 

BB-21BB-21 Buell Blast (all). Includes 5 aramid fibers friction plates on tempered steel cores. Starburst groove pattern for maximum heat dissipation and oil circulation. Included are 5 tempered steel drive plates and a 15% stronger than
stock diaphragm clutch spring. Clutch has 15% more surface area and a pre-measured stack height for easy, accurate installation. MAKE
THAT BLAST DO WHEELIES!


BT5EBT5-ECONO 1941-1984 Big-Twin. Kit Includes 5 aramid fibers friction plates with tempered steel cores. Maximum groove pattern for excellent heat dissipation & oil circulation (run wet or dry). Steel plates not included!
Stack height:
Friction plates only .218 – .220″ each


BT5EBTX-5 1941-1984 Big Twin. Includes five aramid fibers friction plates (6061 T6 aluminum core) with maximum depth groove pattern for efficient heat dissipation and oil circulation. Included are four tempered steel drive plates. Clutch pack height is preset for easy installation.
Stack Height:
Frictions and steels 1.575 to 1.590″


BTX5EBTX-5E HIGH PERFORMANCE EXTRA PLATE KIT for 1941-1984 Big-Twin. Includes 6 aramid fibers friction plates with 6061 T6 aluminum cores & 5 tempered steel drive plates. Also included are 10 ZERO CRUSH coil type clutch springs. Stack height is preset for easy, accurate installation (run wet or dry).
Stack Height:
Frictions and steels 1.575 to 1.590″


BTX9

BTX9

BTX-9 1984-1989 Big Twin. Includes six aramid fibers friction plates with tempered steel cores and seven tempered steel drive plates. 25% wider than OEM clutchplates for a significant increase in clutch area. Stack height is preset for easy installation (run wet or dry). 25% WIDER THAN STOCK for maximum holding.
Stack Height:
Frictions and steel .695 to .710″


BTX-11

BTX-11

BTX-11 HIGH PERFORMANCE EXTRA PLATE KIT
1990-97 Big-Twin & 1991 to present Sportster (XL). Includes 8 aramid fibers friction plates on tempered steel cores. Starburst groove pattern for maximum heat dissipation & oil circulation. Included are 6 tempered steel drive plates. Preset stack height for easy installation. 15% more clutch area for
high performance strokers. Includes 15% stronger diaphragm spring.
Stack Height:
Frictions and steels- This one you re-use the double riveted steel plate so all frictions, steels and double riveted steel plate 1.275 – 1.290″


BTXP12

BTXP12

BTXP-12 High Performance Extra Plate Kit 1990-1997 Big Twin and 1991 to present Sportster (XL). Includes nine aramid fibers friction plates on tempered steel cores. Starburst groove pattern for maximum heat dissipation and oil circulation. Included are eight tempered steel drive plates. Preset stack height for easy installation. 15% more clutch area for high performance strokers. Includes 15% stronger diaphragm spring. Remove OEM rivet plate! 15% MORE SURFACE AREA THAN STOCK.
Stack Height:
Frictions and steels 1.275 – 1.290″


BTX14

BTX14

BTX-14 1998 Big Twin and Twin Cam models through present. Includes nine aramid fibers friction plates on 6061 T6 aluminum cores and eight tempered steel drive plates. Preset stack height for installation.
Stack Height:
Frictions and steels 1.840 – 1.855″


BTXP14BTXP-14 High Performance Extra Plate Kit – 1998 Big- Twin & Twin Cam models thru present. Includes 10 aramid fibers friction plates on 6061 T6 aluminum cores, 9 tempered steel drive plates and a 10% stronger than stock
diaphragm spring. Pre-measured stack height for easy, accurate installation. Perfect for Hot Street or Strokers! 11% MORE SURFACE AREA THAN STOCK. Includes performance diaphragm clutch spring.
Stack Height:
Frictions and steels 1.840 – 1.855″


VRX7

VRX7

VRX-7 V-ROD 2002 to 2008. Includes 9 aramid fibers friction plates on 6061 T6 aluminum cores, 8 tempered steel drive plates and 5 zero collapse coil type clutch springs. Pre-measured stack height for easy, accurate installation.
Stack Height:
Frictions and steels 1.975 – 1.990″


VRXP7

VRXP7

VRXP-7 High Performance Extra Plate Kit. V-ROD 2002 to 2008. Includes10 aramid fibers friction plates on 6061 T6 aluminum cores, 9 tempered steel drive plates and 5 zero collapse coil type clutch springs. Pre-measured stack height for easy, accurate installation. 11% MORE SURFACE AREA THAN STOCK.