TF1000 Top Fuel
Our monster TF-1000 (ALL BILLET) “TOP FUEL STREET DRIVE” is ready for action. The 14mm by 85mm wide (3-3/8”) belt is the same that the Top Fuel racers use on their 600-plus-horsepower machines.
TF-1000 Top Fuel
This monster’s aramid clutch consists of varying spring pressure to accommodate any size motor on the market. The hub is machined from 7075 aluminum and then hard anodized for superior strength. This kit is designed for oil filter mounting in the motor plate. The TF-1000 is the complete drive without outboard bearing support.
Fits Softail® 1990-2006
TF-1000 Top Fuel
| Description | BDL Part No. | |
|---|---|---|
 Drive Kit for TF-1000 | ||
| A | Rear Basket FOR TOP FUEL DRIVES ONLY | TFRP-46 |
| B | 30 Tooth Front Pulley FOR TOP FUEL DRIVES ONLY below) | TFFP-30 |
| C | 14mm 85 Tooth 85mm Wide Belt for TF Drives | BDL-14-85 |
| D | Clutch Hub FOR TOP FUEL DRIVES ONLY | TFCH-180 |
| E | Complete Clutch Kit (includes fibers and steels) | TFCPS-100 |
| F | Pressure Plate For Top Fuel Drives | TFSS-PP |
| G | Hub Nut with Seal (NO LONGER AVAILABLE) | HNS-100 |
| H | Adjusting Screw and Clutch Hub Nut | CDAS-100A |
| I | Shoulder Bolts Set of 9 | CDSB-100 |
| J | Replacement Coil Springs set of 6 | ECS-100 |
| L | Hardware Kit for TF drive | TFHK-200 |
| M | Softail® Motor Plate | TFMP-100 |
| MB | Motor Plate Bearing | MPB-9 |
| N | Starter Housing | TFSH-100 |
| O | Side Guard | TFSG-1000 |
| P | Fram Oil Filter #PH6022 | N/A |
| Q | Starter Pinion gear | PG-100 |
| R | Standoffs for Top Fuel Drive | TFSO-100 |
| S | Front pulley cover for TF-2000 | TFFPC-1000 |
| T | Rear Clutch Cover for TF-2000 | TFRPC-1000 |
| U | 1/2" Offset Insert (for standard applications) (not shown) | IN-500 |
| V | Ring Gear | SG-2 |