EVO-11S-2 Series
BDL’s new 2″ open drive for baggers is now available for 1990-2006 models. These kits are contrast machined. We have incorporated a unique top belt guard into the system, which fits in a groove between the motorplate and side guard. BDL’s Ball Bearing Lock Up Clutch is used along with a special pulley ratio that affords greater overall RPM management. The new drives are designed to allow proper replacement of the floorboards without any interference. Available in Polished, Black (B) and Clear Anodize (CA).
-
-
EVO-11S-2 Polished Fits 1990-2006
-
-
EVO-11-S2B Black
-
-
EVO-11S-2CA Clear Anodize Fits 1990-2006
Drive Kit for EVO-11S-2
| Description | BDL Part No. |
Drive Kit for EVO-11S-2 | |
A | Rear Basket 69 Tooth 2" (see break down below) | B69-EV3 |
B | Front Pulley 52 Tooth 2" Wide | B52-EV |
C | 132 Tooth 2" Wide Belt | BDL-132-2 |
D | Clutch Hub (see break down below) | EV-180 |
E | Complete Clutch Kit (includes fibers and Ball Bearing Pressure Plates) | ERCPS-100 |
F | Ball Bearing Pressure Plate | BPP-600 |
G | 3/4-16 Left Handed Hex Nut for Inner Hub | EVHN-500 |
H | O-Ringed Adjusting Screw | AS-500 |
L | Hardware Kit for EVO-13B-2 | HK-11-2 |
M | Motor Plate for 1990-2006 FLT Models | MP-11-2(B)(CA) |
MB | Motor Plate Bearing | MPB-9 |
N | Starter Housing for EVO-11S-2 | EV-11SH(B)(CA) |
O | Side Guard (used with EVO-11S-2 & EVO-13B) | 13SG(B)(CA) |
P | Dome Cover and Chrome Screws | EVRC-500(B)(CA) |
Q | Pinion Gear | PG-100 |
R | Stand Off Kit for EVO-11S-2 | EV-11SO(B)(CA) |
S | Belt Guard for EVO-11S-2 | EV-11BG |
Hub EV-180
| Description | BDL Part No. |
Hub EV-180 | |
D | Inner Hub | EV-180 |
D1 | Step Washer and Screws | ESW-1 |
D2 | C-Clip for Backside of Hub | CC-158 |
Rear Basket 69-EV2
| Description | BDL Part No. |
Rear Basket 69-EV2 | |
A | Rear Basket (includes all parts below when ordering 69-EV-2) | 69-EV2 |
A1 | Starter Ring Gear | SG-3 |
A2 | Drive Dogs (set of 12) | EVRD-1 |
A3 | Hub Bearing | EHB-100 |
A4 | C-Clip for hub bearing | CC-244 |
Front Pulley EV52
| Description | BDL Part No. |
Front Pulley and Insert EV-52 | |
B | Front Pulley 52 Tooth 69mm | EV-52 |
B1 | Standard Insert | IN-STD |