EVO-11S-A
The EVO-11S has been discontinued. We redesigned the motor plate for the new side guard & rear dome cover, a new side guard that uses 2 standoffs w/1/2-13 threads and the newly designed starter housing that also fits Softail® & Dyna. You can be reassured this drive can outlast and outperform the competition.

EVO-11S-A
Our one-piece 6061-T6 polished billet motor plate locks the tranny and engine together. All of these kits include a 3” wide belt drive unit with polished pressure plate, double row sealed main shaft bearing and a complete ball bearing clutch kit with aramid plates.
For installation in wide frame/tire applications, choose the appropriate insert to space the front pulley for FXR FLT® models from 1990 to 2006.
Drive Kit for EVO-11S-A
Description | BDL Part No. | |
---|---|---|
A | Rear Basket | 72-3E |
B | 48 Tooth Front Pulley | 48-OFP |
C | 132 Tooth 3" Wide Belt | BDL-132-3 |
D | Clutch Hub | EV-180 |
E | Complete Clutch Kit (includes fibers and steels) | ERCPS-100 |
F | Spring Pressure Plate | EPP-100 |
G | Hub Nut with Seal (NO LONGER AVAILABLE) | HNS-100 |
H | Adjusting Screw and Clutch Hub Nut | CDAS-100A |
I | Shoulder Bolts Set of 6 | ESB-100 |
J | Replacement Coil Springs set of 6 | ECS-100 |
L | Hardware Kit for EVO-11S-A | HK-11A |
M | Motor Plate for 1990-2006 FLT Models | MP-11A |
MB | Motor Plate Bearing | MPB-9 |
N | Starter Housing | SH-9A |
O | Side Guard and Dome Cover Kit | SG-11A |
Q | Starter Pinion Gear | PG-100 |
Hub EV-180
Description | BDL Part No. | |
---|---|---|
D | Inner Hub | EV-180 |
D1 | Step Washer and Screws | ESW-1 |
D2 | C-Clip for Backside of Hub | CC-158 |
Rear Basket 72-3E
DESCRIPTION | BDL PART NO. | |
---|---|---|
A | Rear Basket (includes all parts below) | 72-3E |
A1 | Starter Ring Gear | SG-2 |
A2 | Drive Dogs (set of 12) | EVRD-1 |
A3 | Hub Bearing | EHB-100 |
Front Pulley 48-OFP
Description | BDL Part No. | |
---|---|---|
B | Front Pulley 48 Tooth 3 | 48-OFP |
B1 | 1/4" Insert (hardware included) | IN-250 |