CLUTCH HUB NUT AND ADJUSTER SCREW 1990-UP
Kit includes:
Adjustment screw with 2 o-rings and EVHN-500 hex nut.
This kit replaces the CDAS-100 and HNS-100.
You must install new dual o-ring adjuster screw from the backside of pressure plate so as to not damage o-rings.
O-rings now seal mainshaft internally from oil transfer to clutch.
Lubricate o-riings with o-ring lube or trnasmission oil from transmission.
NOTE:
The use of a red thread locker is required on all BDL transmission clutch hub nuts.