Replacement Rear Drive Belts
Belt Drives, Ltd. is the largest aftermarket supplier of rear-drive belts.
The PCC belt is manufactured by Gates Rubber. Gates is one of the OEM’s to HD with this type of belt. The belt is made with polyurethane with carbon cord this belt is a standard workhorse.
The SPC belt by ContiTech is made with specially blended rubber with carbon cord. This belt has unparalleled strength and wear characteristics. It’s no wonder why this is our # 1 selling rear belt.
The PA belt is made with specially blended rubber with ultra cord. We have been supplying this belt since 1995. It works great with custom aluminum pulleys and was the # 1 bike builder’s choice when using non- coated pulleys.
The rear-drive belt sizes are from 125 teeth up to 140 teeth from 1-1/2″ wide down to 20mm wide.
The same goes for the decades of primary belt experience Belt Drives, Ltd. has under its “belt”.
When it comes to rear-drive pulleys and primary drive systems, BDL more than likely has a belt or a system to fit your American V-Twin motorcycle.
*NOTE: 1″ and 1-1/8″ wide belts are designed for custom show only. They are not intended to be used in lieu of a 1-1/2″ wide belt. Use of a 1″ or 1-1/8″ wide belt is at the user’s discretion and no warranty claims are made or implied by the manufacturers of the belts, Belt Drives Ltd, or distributors of this belt.
We use and supply belts from all of the major belt manufacturers. We also stock belts for use with our competitor’s drives. There is no warranty on any belt!