SHS-600
New from BDL is our SHS-600 Shovel Shorty 2″ electric start drive. The kit is a 2″ electric start set up with a rear plate that covers the trans for support for the rear clutch basket.
It comes complete with front and rear pulley, BDL’s aramid clutch and our 140 tooth 2″ belt. The rear plate includes our mini starter housing, pinion gear and starter ring gear guard.
Drive Kit for SHS-600
| Description | BDL Part No. | |
|---|---|---|
 Drive Kit for SHS-600 | ||
| A | Motor Plate (w/hardware) | SHS-600MP |
| B | Ring Gear Guard (w/hardware) | SGC-S |
| C | Starter Standoff | SH-500SSO |
| D | Starter Housing (w/hardware) | SH-EV-SH |
| E | Front Pulley | EV-52 |
| F | Insert Kit (w/hardware) | IN-500 |
| G | Pinion Gear Kit (w/hardware) | PG-200 |
| H | Rear Cover (w/hardware) | EVRC-500 |
| J | Rear Pulley | 69-EV2 |
| K | Belt (not shown) | BDL-142-2 |
| L | Quiet Clutch Fibers (set of 7) (not shown) | ERCP-100 |
| M | Clutch Steels (set of 7) (not shown) | ERCS-100 |
| MB | Motor Plate Bearing | MPB-10 |
| N | Steel Backing Plate (not shown) | EDP-200 |
Ball Bearing Pressure Plate Kit BPP-100
| Description | BDL Part No. | |
|---|---|---|
 Ball Bearing Pressure Plate Kit BPP-100 | ||
| A | Patented Ball Bearing Pressure Plate | BPP-100 |
| B | Set of 32-3/8" Ball Bearings | SS-SBB |
| C | Diaphragm Spring | DES-100 |
| D | Spring Retainer | DCS-100 |
| E | 4 each 3/8" x 3/4" Shoulder Bolts | SSB-4 |