SH-500 Series
Got HP? If so, you’re going to want to get your hands on one of the new SH-500 DRIVE systems by Belt Drives, Ltd. The latest in a long line of trend setting drives, the 500 SERIES offers enthusiasts a number of significant advantages over other aftermarket and stock systems. First, BDL’s reinforced 2” belt was developed specifically to handle the high torque and horsepower numbers being produced by today’s big inch V-Twin engines. Additionally, the system incorporates a bullet proof, one-piece billet motor plate and unique side guard and starter gear cover.
-
- SH-500B Black Fits 1970-1978
-
- SH-500CA Clear Anodize Fits 1970-1978
Every 500 kit includes the very latest in clutch technology with BDL’s own patented BALL BEARING CLUTCH. The state of the art design offers up to 30% more contact surface, reduced lever pull, smother transition, super quiet operation and flawless clutch engagement. Instead of a 5 in a 4 shovel, our special gear ratio allows the 4 speed to come of the line with power and affords great highway performance and mileage.
Available in Polished (not shown), Black (B) and Clear Anodize (CA).
Drive Kit for SH-500
| Description | BDL Part No. | |
|---|---|---|
 Drive Kit for SH-500 | ||
| A | Rear Basket 69 Tooth 2" | 69-EV2 |
| B | 52 Tooth 2 Inch Front Pulley | EV-52 |
| C | 2" HTD Rubber Belt 142 Tooth | BDL-142-2 |
| D | Clutch Hub | EV-190 |
| E | Complete Clutch Kit (includes fibers and steels) | ERCPS-100 |
| F | Patented Ball Bearing Pressure Plate | BPP-600 |
| H | Adjusting Screw & Nut | CDAS-200 |
| L | Hardware Kit | SH-500HK |
| M | Motor Plate | SH-500MP |
| MB | Motor Plate Bearing | MPB-10 |
| N | Starter Housing | SH-EV-SH |
| O | Side Plate for SH-500 | SG-EV-500 |
| P | Rear Dome Cover with Chrome Screws | EVRC-500 |
| Q | Starter Pinion Gear Kit for 2" Open Shovelhead Drives | PG-200 |
| R | Standoffs | SO-500 |
| S | Starter Housing Spacer | SH-500SSO |
| T | Starter Gear Guard | SGC-S |
Rear Basket 69-EV2
| Description | BDL Part No. | |
|---|---|---|
 Rear Basket 69-EV2 | ||
| A | Rear Basket (includes all parts below when ordering 69-EV-2) | 69-EV2 |
| A1 | Starter Ring Gear | SG-3 |
| A2 | Drive Dogs (set of 12) | EVRD-1 |
| A3 | Hub Bearing | EHB-100 |
| A4 | C-Clip for hub bearing | CC-244 |
Hub EV-190
| Description | BDL Part No. | |
|---|---|---|
 Hub EV-190 | ||
| D | Shallow Taper Hub 1979-84 | EV-190 |
| D1 | C-Clip for Backside of Hub | CC-158 |
Front Pulley EV52
| Description | BDL Part No. | |
|---|---|---|
 Front Pulley and Insert EV-52 | ||
| B | Front Pulley 52 Tooth 69mm | EV-52 |
| B1 | Standard Insert | IN-STD |
Ball Bearing Pressure Plate Kit BPP-100
| Description | BDL Part No. | |
|---|---|---|
 Ball Bearing Pressure Plate Kit BPP-100 | ||
| A | Patented Ball Bearing Pressure Plate | BPP-100 |
| B | Set of 32-3/8" Ball Bearings | SS-SBB |
| C | Diaphragm Spring | DES-100 |
| D | Spring Retainer | DCS-100 |
| E | 4 each 3/8" x 3/4" Shoulder Bolts | SSB-4 |