EV0-12S
BDL’s EVO-12S is the work horse of belt drives. With over 50,000 kits running on bikes today you can be reassured this drive can outlast and out perform the competition. Our one-piece 6061-T6 polished billet motor plate locks the transmission and engine together.
EVO-12S
All of these kits include a 3″ wide belt drive unit with polished pressure plate, double row sealed main shaft bearing, polished aluminum side plate and pulley covers and a complete “BDL Clutch” with aramid plates. For installation in wide frame/tire applications, choose the appropriate insert. For Dyna® Models from 1990 to 2006.
Drive Kit for EVO-12S
| Description | BDL Part No. |
Drive Kit for EVO-12S | |
A | Rear Basket | 72-3E |
B | 47 Tooth Front Pulley | 47-OFP |
C | 3 HTD Rubber Belt | BDL-141-3 |
D | Clutch Hub | EV-180 |
E | Complete Clutch Kit (includes fibers and steels) | ERCPS-100 |
F | Spring Pressure Plate | EPP-100 |
G | Hub Nut with Seal (NO LONGER AVAILABLE) | HNS-100 |
H | Adjusting Screw and Clutch Hub Nut | CDAS-100A |
I | Shoulder Bolts Set of 6 | ESB-100 |
J | Replacement Coil Springs set of 6 | ECS-100 |
K | Front Pulley Nut & Washer | FHN-2, WA-3 |
L | Hardware Kit for EVO-12S | HK-12 |
M | Softail® Motor Plate | MP-12 |
MB | Motor Plate Bearing | MPB-9 |
N | Starter Housing | SH-9 |
O | Side Plate | SP-9 |
P | Dome covers | MD-100 |
Q | Starter Pinion gear | PG-100 |
Hub EV-180
| Description | BDL Part No. |
Hub EV-180 | |
D | Inner Hub | EV-180 |
D1 | Step Washer and Screws | ESW-1 |
D2 | C-Clip for Backside of Hub | CC-158 |
Rear Basket 72-3E
| DESCRIPTION | BDL PART NO. |
72-3E Rear Basket | |
A | Rear Basket (includes all parts below) | 72-3E |
A1 | Starter Ring Gear | SG-2 |
A2 | Drive Dogs (set of 12) | EVRD-1 |
A3 | Hub Bearing | EHB-100 |
Front Pulley 47-OFP
| Description | BDL Part No. |
Front Pulley 47-OFP | |
B | Front Pulley 47 Tooth 3" | 47-OFP |
B1 | Standard Insert (hardware included) | IN-STD |