EVO-10S

EVO-10S

BDL’s EVO-10S is the workhorse of belt drives. With over 50,000 kits running on bikes today you can be reassured this drive can outlast and outperform the competition.

EVO-10S, SF, ST, STF

EVO-10S, SF, ST, STF

Our one-piece 6061-T6 polished billet motor plate locks the trans and engine together. All of these kits include a 3″ wide belt drive unit with polished pressure plate, double row sealed main shaft bearing, polished aluminum side plate and pulley covers and a complete “BDL Clutch” with aramid plates.

NOTE: Kit comes with 1/4″ insert for stock application. For installation in wide frame/ tire applications, choose the appropriate insert. For Shovelhead® models from 1970 to 1978.


Drive Kit for EVO-10S

 DescriptionBDL No.
Drive Kit for EVO-10S
ARear Basket76-3E
B47 Tooth Front Pulley47S-3
C3 HTD Rubber BeltBDL-37144-3
DTaper Hub 1979-84EV-190
EComplete Clutch kit (includes fibers and steels)ERCPS-100
FSpring Pressure PlateEPP-100
IShoulder Bolts Set of 6ESB-100
JReplacement Coil Springs set of 6ECS-100
LHardware kit for EVO-10SHK-10
MShovelhead Motor PlateMP-10
MBMotor Plate BearingMPB-10
NStarter HousingSH-10
OSide PlateSP-10
PDome coversMD-200
QStarter Pinion Gear for Shovelhead ModelsPG-200

Hub EV-190

 DescriptionBDL Part No.
Hub EV-190

Hub EV-190

DShallow Taper Hub 1979-84EV-190
D1C-Clip for Backside of HubCC-158

Rear Basket 76-3E

 DescriptionBDL Part No.
763e rear basket
ARear Basket (includes all parts below when ordering 76-3E)76-3E
A1Starter Ring GearSG-2
A2Drive Dogs (set of 12)EVRD-1
A3Hub BearingEHB-100
A4C-Clip for Hub BearingCC-244

Front Pulley 47S-3

 DescriptionBDL Part No.
Front Pulley 47S-3
BFront Pulley 47 Tooth 3"47S-3
B11/4" Insert and Nut (nut not shown)IN-250