EVO-10STF WITH STARTER
BDL’s EVO-10STF is the workhorse of belt drives. With over 50,000 kits running on bikes today you can be reassured this drive can outlast and outperform the competition.
EVO-10S, SF, ST, STF
Our one-piece 6061-T6 polished billet motor plate locks the trans and engine together. All of these kits include a 3″ wide belt drive unit with polished pressure plate, double row sealed main shaft bearing, polished aluminum side plate and pulley covers and a complete “BDL Clutch” with aramid plates. This kit will accommodate the oil filter in the center of the plate, the side guard can still be used without interference. NOTE: Kit comes with 1/4″ insert for stock applications. For installation in wide frame/ tire applications, choose the appropriate insert. For Shovelhead® Models from 1970 to 1978.
Drive Kit for EVO-10STF with Starter
| Description | BDL Part No. | |
|---|---|---|
EVO-10S, SF, ST, STF | ||
| A | Rear Basket (breakdown below) | 76-3E |
| B | 47 Tooth Front Pulley (breakdown below) | 47S-3 |
| C | 3” HTD Rubber Belt | BDL-37144-3 |
| D | Taper Hub 1970-78 | EV-190 |
| E | Complete Clutch Kit (includes fibers and steels) | ERCPS-100 |
| F | Spring Pressure Plate | EPP-100 |
| I | Shoulder Bolts Set of 6 | ESB-100 |
| J | Replacement Coil Springs set of 6 | ECS-100 |
| L | Hardware Kit for EVO-10S | HK-10 |
| M | Shovelhead Motor Plate W/ Oil Filter Relocation Kit | BDL-1000-F |
| MB | Motor Plate Bearing | MPB-10 |
| N | Starter Housing | SH-10 |
| O | Side Plate | SP-10 |
| P | Dome covers | MD-200 |
| Q | Starter Pinion Gear for Shovelhead Models | PG-200 |
| R | Oil Filter (Fram Filter PH6022) | NA |
| S | All Balls Starter | STR-100 |
Rear Basket 76-3E
| Description | BDL Part No. | |
|---|---|---|
 | ||
| A | Rear Basket (includes all parts below when ordering 76-3E) | 76-3E |
| A1 | Starter Ring Gear | SG-2 |
| A2 | Drive Dogs (set of 12) | EVRD-1 |
| A3 | Hub Bearing | EHB-100 |
| A4 | C-Clip for Hub Bearing | CC-244 |
Hub EV-190
| Description | BDL Part No. | |
|---|---|---|
 Hub EV-190 | ||
| D | Shallow Taper Hub 1979-84 | EV-190 |
| D1 | C-Clip for Backside of Hub | CC-158 |
Front Pulley 47S-3
| Description | BDL Part No. | |
|---|---|---|
 | ||
| B | Front Pulley 47 Tooth 3" | 47S-3 |
| B1 | 1/4" Insert and Nut (nut not shown) | IN-250 |