EVO-10ST Includes Starter
With BDL’s EVO-10ST you can be reassured this drive can out last and out perform the competition.
EVO-10S, SF, ST, STF
Our one piece 6061-T6 polished billet motor plate locks the transmission and engine together. All of these kits include a 3″ wide belt drive unit with polished pressure plate, double row sealed main shaft bearing, polished aluminum side plate and pulley covers and a complete Competitor Clutch with aramid plates. This kit is supplied with an optional oil filter mount centered on the motor plate. The kit allows the oil lines to be hidden out of the way. The kit also includes an All Balls starter. For installation in wide frame/tire applications, choose the appropriate insert to space the front pulley. For Shovelhead models from 1970-1978.
Drive Kit for EVO-10ST
| Description | BDL Part No. | |
|---|---|---|
EVO-10S, SF, ST, STF | ||
| A | Rear Basket | 76-3E |
| B | 47 Tooth Front Pulley | 47S-3 |
| C | 3 HTD Rubber Belt | BDL-37144-3 |
| D | Taper Hub 1979-84 | EV-190 |
| E | Complete Clutch kit (includes fibers and steels) | ERCPS-100 |
| F | Spring Pressure Plate | EPP-100 |
| I | Shoulder Bolts Set of 6 | ESB-100 |
| J | Replacement Coil Springs set of 6 | ECS-100 |
| K | Front Pulley Nut & Washer | FHN-2, WA-2 |
| L | Hardware Kit for EVO-10S | HK-10 |
| M | Shovelhead Motor Plate | MP-10 |
| MB | Motor Plate Bearing | MPB-10 |
| N | Starter Housing | SH-10 |
| O | Side Plate | SP-10 |
| P | Dome Covers | MD-200 |
| Q | Starter Pinion Gear for Shovelhead Models | PG-200 |
| S | All Balls Starter | STR-100 |
Hub EV-190
| Description | BDL Part No. | |
|---|---|---|
 Hub EV-190 | ||
| D | Shallow Taper Hub 1979-84 | EV-190 |
| D1 | C-Clip for Backside of Hub | CC-158 |
Rear Basket 76-3E
| Description | BDL Part No. | |
|---|---|---|
 | ||
| A | Rear Basket (includes all parts below when ordering 76-3E) | 76-3E |
| A1 | Starter Ring Gear | SG-2 |
| A2 | Drive Dogs (set of 12) | EVRD-1 |
| A3 | Hub Bearing | EHB-100 |
| A4 | C-Clip for Hub Bearing | CC-244 |
Front Pulley 47S-3
| Description | BDL Part No. | |
|---|---|---|
 | ||
| B | Front Pulley 47 Tooth 3" | 47S-3 |
| B1 | 1/4" Insert and Nut (nut not shown) | IN-250 |