EV0-900S and EVO-900SF
Our EVO-900SF is the drive for people that would like the comfort and reliability of an outboard bearing support. This drive was designed with the same ideas of our Top Fuel Street drive the TF-2000.
EVO-900S and EVO-900SF
This drive has all the components of the EVO–9S but with a strong billet outer bearing support to help minimize flex in the motor plate for high horsepower motors. This drive also includes our oil filter relocation kit so you can clean up the look of your bike by hiding your filter and oil lines on and behind our belt drive. Fits 1990-2006 Softail®
| Description | BDL Part No. | |
|---|---|---|
 | ||
| A | Rear Basket | 72-3EX |
| B | 47 Tooth Front Pulley | 47-OFP |
| C | 3" HTD Rubber Belt | BDL-141-3 |
| D | Clutch Hub | EV-180 |
| E | Complete Clutch Kit (inc. fibers and steels) | ERCPS-100 |
| F | Pressure Plate for EVO-3000 w/Springs & Shouder Bolts | EVO-3000PP |
| G | Hub Nut with Seal (NO LONGER AVAILABLE) | HNS-100 |
| H | Adjusting Screw and Clutch Hub Nut | CDAS-100A |
| I | Shoulder Bolts Set of 6 | CDSB-100 |
| J | Replacement Coil Springs set of 6 | ECS-100 |
| K | Front Pulley Nut & Washer | FHN-2, WA-2 |
| L | Hardware Kit for EVO-9S | HK-9 |
| M | Softail® Motor Plate | MP-9 |
| MB | Motor Plate Bearing | MPB-9 |
| N | Starter Housing | SH-9A |
| O | Bearing Support Plate for EVO-3000 | EVO-3000SP |
| Q | Starter Pinion Gear | PG-100 |
| R | Standoffs for EVO-3000 | EVO-3000SO |
| S | Front Pulley Cover for EVO-3000 | EVO-3000FC |
| T | Rear Clutch Cover for EVO-3000 | EVO-3000RC |
| U | Bearing Covers (sold in set of 2) | EVO-3000BC |
| V | Sealed Bearing (only one needed) | EVO-3000SB |
| W | Oil Filter (Fram Filter PH6022) (for EVO-900SF) | N/A |
Hub EV-180
| Description | BDL Part No. | |
|---|---|---|
 Hub EV-180 | ||
| D | Inner Hub | EV-180 |
| D1 | Step Washer and Screws | ESW-1 |
| D2 | C-Clip for Backside of Hub | CC-158 |
Rear Basket 72-3EX
| Description | BDL Part No. | |
|---|---|---|
 Rear Basket 72-3EX | ||
| A | Rear Basket (includes all parts below when ordering 72-3EX) | 72-3EX |
| A1 | Starter ring Gear | SG-2 |
| A2 | Drive Dogs (set of 12) | EVRD-1 |
| A3 | Hub Bearing | EHB-100 |
| A4 | C-Clip for hub bearing | CC-244 |
Front Pulley 47-OFP
| Description | BDL Part No. | |
|---|---|---|
 Front Pulley 47-OFP | ||
| B | Front Pulley 47 Tooth 3" | 47-OFP |
| B1 | Standard Insert (hardware included) | IN-STD |