EVO-9S Series
This is it. This is the one. The EVO-9S, the most popular belt drive kit ever. Everybody wants this belt drive kit. More than 50,000 of these kits are on the streets. The cleanest and sleekest of all belt drives, this 3 inch wide baby has been purrin’ down the roads of the entire world for decades!
Name a country and this drive has probably been there! Name a bike builder and they have used one. If you have a Softail® style motorcycle from 1990 – 2006 this is the most affordable and durable belt drive for you. You too can have the kit that most all of the “Build your own Bike” kits used and still use to this day.
EVO-9S
The dual dome scalloped side guard kit comes with a 47 tooth front pulley and 72 tooth rear basket and the 141 by 3-inch wide belt. Along with our famous customer approved aramid clutch plates and most recognized domed pressure plate out there, this pressure plate has the capability of using either 6, 8, 9 or 12 coil springs to meet your power needs. You adjust the pull and pressure of your clutch by the number of springs you install.
Want that Hot Rod look? Remove the domed pulley covers and you have that Bad Boy look. This motor plate starts as a 40 lb. piece of 6061-T6 billet, then we have our way with it. Add some of our favorite components and BOOM! it comes to life.
Drive Kit for EVO-9S Series
| DESCRIPTION | BDL PART NO. | |
|---|---|---|
 Drive Kit for EVO-9S Series | ||
| A | Rear Basket | 72-3E |
| B | 47 Tooth Front Pulley | 47-OFP |
| C | 3" HTD Rubber Belt | BDL-141-3 |
| D | Clutch Hub | EV-180 |
| E | Complete Clutch Kit (includes fibers and steels) | ERCPS-100 |
| F | Spring Pressure Plate | EPP-100 |
| G | Hub Nut with Seal (NO LONGER AVAILABLE) | HNS-100 |
| H | Adjusting Screw and Clutch Hub Nut | CDAS-100A |
| I | Shoulder Bolts Set of 6 | ESB-100 |
| J | Replacement Coil Springs set of 6 | ECS-100 |
| K | Front Pulley Nut & Washer | FHN-2, WA-3 |
| L | Hardware kit for EVO-9S | HK-9 |
| M | Softail Motor Plate | MP-9 |
| MB | Motor Plate Bearing | MPB-9 |
| N | Starter Housing | SH-9A |
| O | Side Plate | SP-9 |
| P | Dome Covers | MD-100 |
| R | Oil Filter (Fram Filter PH6022) (for EVO-9SF) | N/A |
Hub EV-180
| Description | BDL Part No. | |
|---|---|---|
 Hub EV-180 | ||
| D | Inner Hub | EV-180 |
| D1 | Step Washer and Screws | ESW-1 |
| D2 | C-Clip for Backside of Hub | CC-158 |
Front Pulley 47-OFP
| Description | BDL Part No. | |
|---|---|---|
 Front Pulley 47-OFP | ||
| B | Front Pulley 47 Tooth 3" | 47-OFP |
| B1 | Standard Insert (hardware included) | IN-STD |
Rear Basket 72-3E
| DESCRIPTION | BDL PART NO. | |
|---|---|---|
 72-3E Rear Basket | ||
| A | Rear Basket (includes all parts below) | 72-3E |
| A1 | Starter Ring Gear | SG-2 |
| A2 | Drive Dogs (set of 12) | EVRD-1 |
| A3 | Hub Bearing | EHB-100 |