EV-600
EV-600 series, fits Softail® models 1990-2006. This kit is a 2″ drive which features a black belt guard that fits between the motor plate and outside cover. The kit also includes our patented Ball Bearing Lock Up clutch which will is standard equipment on all BDL drives. The proprietary 2″ belt and pulley combination affords optimum performance throughout the entire RPM range.
We offer this kit in Polished, Black Anodize (B) and Clear Anodize (CA).
-
- EV-600 Polished Fits 1990-2006 Softail®
-
- EV-600B Black Fits 1990-2006 Softail®
-
- EV-600CA Clear Anodize Fits 1990-2006 Softail®
Drive Kit for EV-600 Series
| DESCRIPTION | BDL PART NO. | |
|---|---|---|
 Drive Kit For EV-600 | ||
| A | 69 Tooth Rear Basket (breakdown below) | 69EV-2 |
| B | 52 Tooth Front Pulley (breakdown below) | EV-52 |
| C | 142 tooth 2 belt | BDL-142-2 |
| D | Clutch Hub | EV-180 |
| E | Complete Clutch Kit (includes fibers and steels) | ERCPS-100 |
| F | Patented Ball Bearing Pressure Plate | BPP-600 |
| G | Hub Nut | EVHN-500 |
| H | Adjusting Screw & Nut | AS-500 |
| K | Front Pulley Nut & Washer | FHN-2, WA-3 |
| L | Hardware Kit for EV-600 | EV-600HK |
| M | Motor Plate | EV-600MP(B)(CA) |
| MB | Motor Plate Bearing | MPB-9 |
| N | Starter Housing | EV-11SH(B)(CA) |
| O | Side Guard | EV-600SG(B)(CA) |
| P | Dome cover w/ Screws | EVRC-500(B)(CA) |
| R | Standoffs for EV-600 | EV-600SO(B)(CA) |
| S | Belt Guard | EV-600BG(B)(CA) |
| T | Pinion Gear | PG-100 |
Hub EV-180
| Description | BDL Part No. | |
|---|---|---|
 Hub EV-180 | ||
| D | Inner Hub | EV-180 |
| D1 | Step Washer and Screws | ESW-1 |
| D2 | C-Clip for Backside of Hub | CC-158 |
Rear Basket 69EV-2
| DESCRIPTION | BDL PART NO. | |
|---|---|---|
 69EV-2 REAR BASKET | ||
| A | Rear Basket (includes all parts below when ordering 69EV-2) | 69EV-2 |
| A1 | Starter Ring Gear | SG-3 |
| A2 | Drive Dogs (set of 12) | EVRD-1 |
| A3 | Hub Bearing | EHB-100 |
| A4 | C-Clip for Hub Bearing | CC-244 |
Front Pulley EV52
| Description | BDL Part No. | |
|---|---|---|
 Front Pulley and Insert EV-52 | ||
| B | Front Pulley 52 Tooth 69mm | EV-52 |
| B1 | Standard Insert | IN-STD |