EV0-900T and EVO-900TF
Our EVO-900TF is the drive for people that would like the strength and reliability of an outboard bearing support.
EV0-900T and EVO-900TF
This drive was designed with the same ideas of our Top Fuel Street drive the TF-2000. This drive has all the components of the EVO-9TF but with a strong billet outer bearing support to help minimize flex in the motor plate for high horsepower motors. This drive fits 1986-1989 Softail® models.
Drive Kit for EVO-900T and EVO-900TF
| Description | BDL Part No. | |
|---|---|---|
 | ||
| A | Rear Basket | 72-3EX |
| B | 47 Tooth Front Pulley | 47-OFP |
| C | 3" HTD Rubber Belt | BDL-141-3 |
| D | Clutch Hub | EV-175 |
| E | Complete Clutch Kit (inc. fibers and steels) | ERCPS-100 |
| F | Pressure Plate for EVO-3000 w/Springs & Shouder Bolts | EVO-3000PP |
| H | Adjusting Screw and Clutch Hub Nut | CDAS-100A |
| I | Shoulder Bolts Set of 9 | CDSB-100 |
| J | Replacement Coil Springs set of 6 | ECS-100 |
| K | Front Pulley Nut & Washer | FHN-2, WA-3 |
| L | Hardware Kit for EVO-9S | HK-9 |
| M | Softail® Motor Plate w/Oil Filter Relocation Kit | BDL-900F |
| MB | Motor Plate Bearing | MPB-9 |
| N | Starter Housing | SH-9A |
| O | Bearing Support Plate for EVO-3000 | EVO-3000SP |
| Q | Starter Pinion Gear | PG-100 |
| R | Standoffs for EVO-3000 | EVO-3000SO |
| S | Front Pulley Cover for EVO-3000 | EVO-3000FC |
| T | Rear Clutch Cover for EVO-3000 | EVO-3000RC |
| U | Bearing Covers (sold in set of 2) | EVO-3000BC |
| V | Sealed Bearing (only one needed) | EVO-3000SB |
| W | Oil Filter (Fram Filter PH6022) (for EVO-900TF) | N/A |
Hub EV-175
| Description | BDL Part No. | |
|---|---|---|
 Hub EV-175 | ||
| D | Inner Hub | EV-175 |
| D1 | C-Clip for Backside of Hub | CC-158 |
Front Pulley 47-OFP
| Description | BDL Part No. | |
|---|---|---|
 Front Pulley 47-OFP | ||
| B | Front Pulley 47 Tooth 3" | 47-OFP |
| B1 | Standard Insert (hardware included) | IN-STD |
Rear Basket 72-3EX
| Description | BDL Part No. | |
|---|---|---|
 Rear Basket 72-3EX | ||
| A | Rear Basket (includes all parts below when ordering 72-3EX) | 72-3EX |
| A1 | Starter ring Gear | SG-2 |
| A2 | Drive Dogs (set of 12) | EVRD-1 |
| A3 | Hub Bearing | EHB-100 |
| A4 | C-Clip for hub bearing | CC-244 |